These instructions will provide guidance on how to configure CleanBrowsing on your SAGEMCOM F@st 1704 router. You can find the user guide for this device here: http://support.sagemcom.com/site/livret/RM_253272861A_Fast_1704_ENG.pdf
Step 1: Access the router
To get started configuring the SAGEMCOM F@st 1704 page you need to login to your router. If you are already logged in you can skip this step.
You can navigate to 192.168.1.1 or http://myrouter in your browser. This is the IP the router will configure by default when it’s connected to your ISP gateway. If this IP doesn’t work you can use some of the defaults we provide on our generic router configuration page: Generic Router Instructions
You will need to log in using your administrator credentials.
Step 2: Navigate to DNS Section in the Router Dashboard
To change the Domain Name System settings, Click on Advanced Settings -> DNS -> DNS Server
Step 3: Update DNS Settings
Click on Use the following DNS IP address
Enter the primary DNS server address in the box labeled DNS Server1 IP Address. This is the address that is always used first.
Key in the secondary DNS server address in the box that reads DNS Server2 IP Address. This becomes a backup and is only used if the first can’t be located.
The CleanBrowsing Family IP's are: 220.127.116.11 18.104.22.168 Note: If you have a paid plan use the DNS IPs provided in your account.
Finally, click the Apply/Save button before you exit.