1. Home
  2. Instructional Guides
  3. Routers & Network Devices
  4. Change DNS on a Actiontex Q1000

Change DNS on a Actiontex Q1000

These instructions will provide guidance on how to configure CleanBrowsing on Actiontex Q1000. It uses generic instructions based on when the router was last configured.

The CleanBrowsing Family IP's are: 


Note: If you have a paid plan use the DNS IPs provided in your account.

Step 1: Access the router

Log into your router’s browser-based utility by entering or your default configuration IP into a browser.

Step 2: Navigate to Advanced Setup menu

Click on the Advanced Setup option.

Step 3: Navigate to WAN Settings

Click WAN Settings from the Broadband Settings /IP Addressing section.

Step 4: Change your DNS type.

The options may differ depending on your firmware. Scroll down to 4. Set the DNS Type then select Static DNS.

The CleanBrowsing Family IP’s are:


Note: If you have a paid plan use the DNS IPs provided in your account.

Enter the CleanBrowsing IP’s into the First and Second DNS resolver address entries appropriately.

Click Apply to save your settings

Guide Categories

Verify Connection & Troubleshooting

After configuring your device or router you can verify your configuration by visiting DNS Leak Test and running the standard test.

We provide a more in depth guide on Verifying and Debugging Connections.

Was this article helpful?

Related Articles